Slim is a flexible and portable robotic motion control solution. It provides the power and capability of programmable, repeatable motion with low logistical overhead and setup time.
- 1.3 Meter [4.25 feet] Radius (2.6 meter [8.5 feet] diameter) Reach Envelope)
- Speeds Up to 3 m/s (1.5-2 m/s practical)
- 6 Axis Position Control (X, Y, Z, Pan, Tilt, Roll)
- Integrated Lens Control up to 3 Axis (Focus, Iris, Zoom)
- Synchronized Outputs Available
- Camera Payload up to 12.5kg
- 110VAC-240VAC, Single Phase, ~400 Watts peak, ~100 Watts idle
- Robot Arm Weighs 33.5Kg
- Standard Mitchell Mount Adapter
- No PC or Laptop Required
Slim can be rapidly programmed on set. The programming starts with setting keyframe positions. This can be done via hand guiding the camera on the robot or operator controls in any combination.
Once keyframes are set, the path is designed using Slim's path planning tools.
Argo is a high speed robotic motion control system. It's powerful software can support the design of complex motions on set.
- 1.1 Meter [3.6 Feet] Reach Radias (2.2 Meter [7.2 Feet] Diameter) Arm
- 2 Meter [6.5 feet] and 5.5 meter [18 feet] track available
- 6 Axis Position Control (X, Y, Z, Pan, Tilt, Roll)
- Speeds Up to 5 m/s
- Integrated Lens Control up to 3 Axis (Focus, Iris, Zoom)
- Camera Payload up to 10kg
- 240VAC, Single Phase, ~3500 Watts peak
- Robot Arm Weighs 65Kg
- Robot Arm Plus 2 meter Track Weighs 150Kg
- Robot Arm Plus 5.5 meter Track Weights 300Kg
- Programmed via Computer With Argosoft software
- Built in capability to synchronize with Audio
- Synchronized Relay Outputs Available
- Wheels available for dynamic control (motion can be recorded and repeated)
Argo is programmed on set by setting a sequence of keyframes then designing a path between them. The operator guides the robot to the directed position using a tablet controller and saves positions. The operator then builds a motion path on a connected computer running the Argosoft path planning software.
D2 Motion has a large 9 meter by 5 meter lightbox with seamless silk scrim filled with 64 Astera Titan Tubes. Each Titan Tube has 16 pixels which can be controlled individually to create stunning effects which can be synchronized with D2 Motion's robotic systems.
- 9 Meter [] by 5 Meter[]
- Seamless silk scrim across full lightbox
- Can be controlled via Argosoft to Synchronize with robot operation
D2 Motion has a programmable turntable for cars on site.
- Rotates cars up to 3,000 kg
- Powered by 3 phase 240VAC
- Speed up to 2 RPM
- Can be programmed and synchronized with robotic motion and light grid effects
Copyright © 2022 D2 Motion - All Rights Reserved.
Powered by GoDaddy
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.